Henny Penny Wendy’s Evolution Elite EEG-253 Service Manual page 59

Remove 3 button head cap screws (1) .
3 3 ) )
Figure 6-3 Motor Encoder Assembly, Spool Coupler, and Selector Valve
Separate old motor encoder assembly (2) from selector valve (3). See Figure
4 4 ) )
Figure 6-3 Motor Encoder Assembly, Spool Coupler, and Selector Valve , page
47.
Connect both harnesses from new motor encoder assembly to AIF board.
5 5 ) )
Power up fryer to let valve find home position.
6 6 ) )
Selector valve calibration occurs automatically upon power up.
Turn selector valve so that new motor encoder spool alignment indicators center
7 7 ) )
over port 10.
47