Advertisement
Press and release the right arrow until "SP-8" "FILTER TRACKING MODE"
1 1 ) )
shows in the display.
Use the up or down arrow to choose either "1.MIXED" filter tracking or "2.
2 2 ) )
GLOBAL"
NOTE:
• GLOBAL means all the products have the same number of cook cycles
between filters
• MIXED means each product may be set with different number of cook cycles
between filters. The controls add the cycle count (see example below) and
when the counts equal 1 or greater, filtering is suggested. Ex., 1 load of fish. 2
loads of french fries, a load of chicken equals 1. 1/2 + 1/8 + 1/8 + 1/4 = 1
Product
Fish
French Fries
Chicken
5 5 . . 1 1 . . 8 8 . . 1 1 M M I I X X E E D D
If MIXED is selected, press the right arrow and "SP-8A" "SUGGEST FILTER
1 1 ) )
AT..." shows in the left display, and a value between 75% and 100% shows on
the right display.
Press the up or down arrow to change this value. The lower the value, the
2 2 ) )
sooner the control recommends to filter. Ex: If set to 75%, the control suggest
filtering after 3/4 of the programmed cook cycles must be completed before the
control suggests filtering.
Press the right arrow and "SP-8B" "LOCKOUT ENABLED?" shows in the left
3 3 ) )
display.
Press the up or down arrow to choose "YES or "NO".
4 4 ) )
If set to "YES", when controls suggest filtering, "FILTER LOCKOUT"/"YOU
5 5 ) )
*MUST* FILTER NOW", shows in display; more cook cycles are refused until
vat is filtered.
Press the right arrow and "SP-8C" "FILTER LOCKOUT AT..." shows in left
6 6 ) )
display and a value between 100% and 250% shows on right display.
Press the up or down arrow to change this value. The lower the value, the
7 7 ) )
sooner the "lockout" occurs. Ex., If set at 100%, "lockout" occurs when the cycle
count reaches 1 or greater. Set at 200%, twice as many cycles are counted
before "lockout" occurs.
5 5 . . 1 1 . . 8 8 . . 2 2 G G L L O O B B A A L L
If GLOBAL is selected, press the right arrow.
1 1 ) )
No. Cook Cycles
Cycle Count
2
8
4
1/2
1/8
1/4
23
Advertisement
