Nordson Encore HD Powder Spray System with Prodigy Color-on-Demand Customer Product Manual page 67

E 2018 Nordson Corporation
11. Insert the bladder supports into the new valve bladders, with the hole
closest to the end of the support going in first.
12. Insert the new valve bladders into the manifold, with the flat edges on
the flanges facing to the center of the manifold.
13. Install the new filter discs on the cover.
14. Install the cover on the manifold and thread the 16 screws in finger tight.
15. Tighten the screws in a crisscross pattern, a turn at a time, until all are
tight. Be careful not to overtighten the screws or the manifold threads
could be damaged.
16. Secure the ground strap to the module bracket with the flat washer, lock
washer, and nut.
17. Install the manifold on the panel.
18. Slide the lock knobs, then the O-rings (9), on the powder tubing.
19. Insert the tubing into the manifold ports until it bottoms out, then screw
the lock knobs into the ports until tight.
6-5
Repair
Part 1605396-04