3-2
Installation
Figure 3-1 Packaged System Pump Stand
Controller Installation
Part 1605396-04
Install the Manual Gun Controller and Color-On-Demand Controller on a
wall, panel, or platform rail before making any connections. Both controllers
must be accessible to the operator at all times.
NOTE: Both Gun 1 controller and Gun 2 controller must be set for the "Gun
No: 1" network address. Refer to the Encore HD Manual Spray System
Controller manual for more information.
Pump Stand Mounting
The panel stand is shipped with a controller support arm. It can be bolted to
the side of the stand with the included M8 x 30 bolts and washers. Use the
universal mounting brackets and included fasteners to mount the controllers
to the arm; color controller above and gun controller below.
Grounding
Connect the ground strap to the controller ground stud and clamp it to a true
earth ground.
E 2018 Nordson Corporation
Need help?
Do you have a question about the Encore HD Powder Spray System with Prodigy Color-on-Demand and is the answer not in the manual?