Troubleshooting
MANAGING ERRORS
If during a sterilization cycle an error occurs do the following:
Wait until the end of the reset
1
phase.
CAUTION! Do not switch off the
sterilizer during the reset
phase: it takes some minutes
to reset the system and reach
safe conditions in the sterilizer
chamber.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
When the OPEN button appears, tap
2
it to unlock the door.
Confirm the opening of the door.
3
Notice: Water could be present in the
chamber when opening the door:
prevent spilling (e.g., place a towel
below the chamber door).
VIEW AND SAVE THE ERROR LOG
On the homepage tap
1
>
: a list of the last errors
appears.
Tap
to save the list in the USB
2
pen drive.
>
>
Diagnostics
105