W&H Lisa VA131-17 Instructions For Use Manual page 20

Getting started
The electrical power supply of the sterilizer must fulfill all applicable
standards in the country of use, and must comply with the data
label on the back of the sterilizer.
WATER CONNECTIONS
The sterilizer clean water tank can be filled manually by the user or
automatically with a water supply system. The water supply
system must deliver demineralized or distilled water meeting the
specifications listed in these instructions. Do not add any
chemical/additive to the water.
The manufacturer's warranty is void if the sterilizer was used with
water containing either chemical additives, or contaminant levels
exceeding those listed in these instructions. See "Feed water
specifications (EN 13060)" on page 126.
Notice: The maintenance of the external water filling system must
be done in exact accordance with the Instructions for Use given
with the relevant system.
20
LAN CONNECTION
Insert a standard Ethernet
1
cable to in the LAN port of
the sterilizer.
WI-FI CONNECTION
For the Wi-Fi connection proceed as follows:
Insert the Wi-Fi key in the USB port.
1
Read the Instructions for Use provided with the Wi-Fi key.
2
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
Insert the other end of the
2
cable in the LAN port of your
computer or computer
network: when the sterilizer
will be switched on it will
connect automatically to the
LAN.