Usb Pen Drive - W&H Lisa VA131-17 Instructions For Use Manual

Getting started
TOUCH SCREEN LED STATUS
Status Description
Visual cycle status
Green in Cycle program in progress
movement
Green fixed Cycle program end
Red in movement Cycle error in progress
Red fixed Cycle error or manual stop end
Visual load temperature*
Blue blinking Less than 40 °C (104 °F)
Yellow blinking From 40 °C to 60 °C (from 104 °F to 140 °F)
Orange blinking More than 60 °C (140 °F)
Smart intelligence
White blinking Active message/pop-up, that disappears when touching the
display.
Note*: The LEDs are active only when the sterilizer door is open.
34
SET THE OPTIONS OF THE TOUCH SCREEN LEDS
To set the information that the LEDs will shown, do the following:
On the homepage tap
1
To activate an option, tap
2
To deactivate an option, tap
3
Tap to confirm and go back to
4
the previous page.

USB pen drive

DESCRIPTION
A USB pen drive is available to be installed in order to automatically
record all the sterilization cycle reports. The USB pen drive can be
inserted equally into the front or rear port.
Notice: Periodically remove the USB pen drive to save the cycle
data on a computer or on another safe support.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
> >
.