Tap the number you want to change
7
and tap
or
to increase it or
decrease it.
Tap
to confirm and go back to
8
the previous page.
Repeat steps from 3 to 7 to add
9
another cycle to the sequence.
Tap
to launch the programmed
10
sequence.
DELETE A CYCLE FROM A PROGRAMMED SEQUENCE
On the homepage tap
1
>
Tap the cycle you want to remove
2
from the sequence.
Tap
to remove the selected
3
cycle.
Tap
to confirm and go back to
4
the previous page.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
>
>
SET THE DRYING TIME
For each ECO DRY mode, the drying time is automatically adjusted
to the total amount of load and cannot be modified. To set a new
drying time for the program, you should disabled the ECO DRY mode
first.
On the homepage tap the cycle and
1
.
Select Fixed to disable the ECO DRY
2
mode.
Tap the wording Fixed to modify the
3
fixed mode minutes.
Sterilization cycles
65