W&H Lisa VA131-17 Instructions For Use Manual page 45

AUTOMATIC PRINTING OPTION
The automatic printing option permits to automatically print a
preset number of labels after a successful sterilization cycle. The
labels are printed only after the user has identified him/herself (with
password if required) and the load has been checked and released,
if these options have been enabled by the administrator.
For the automatic label printing, a maximum storage time in weeks
can be set. This value is used to calculate the expiry date to be
printed on the labels (see "Label content description" on page 47).
SET THE AUTOMATIC LABEL PRINTING
On the homepage tap
1
Activate Automatic printing.
2
Tap or to set the maximum
3
storage time and the number of
labels to be printed automatically.
Tap to confirm and go back to
4
the previous page.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
> >
SET THE MANUAL LABEL PRINTING
The manual printing option permits the user at the beginning of a
sterilization cycle to set manually the number of labels to print.
On the homepage tap
1
Activate Manual printing.
2
Tap to confirm and go back to
3
the previous page.
Managing printers
> >
45