W&H Lisa VA131-17 Instructions For Use Manual page 31

SET THE STERILIZER NAME
To change the sterilizer name that appears in the cycle reports:
On the homepage tap
1
>
Tap the text box: a keyboard
2
appears.
Enter the new sterilizer name.
3
Tap to confirm.
4
Tap to go back to the previous
5
page.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
> >
SET THE DISPLAY BRIGHTNESS
To change the display brightness:
On the homepage tap
1
>
Tap or to change the value.
2
Tap to confirm and go back to
3
the previous page.
CONNECT TO A NETWORK
If you connect through an Ethernet cable, in most cases the
sterilizer will connect to the network automatically.If it does not
connect automatically, or if you are using a Wi-Fi dongle key, follow
the following procedure under supervision of your IT manager /
network administrator.
> >
Getting started
31