W&H Lisa VA131-17 Instructions For Use Manual page 62

Sterilization cycles
Wait the end of the sterilization. Tap
7
to view the cycle parameters in
real time. See "View the cycle
parameters" on page 66.
The sterilization is completed. Tap
8
to view the cycle summary or
tap to view the cycle
information. See "View the cycle
parameters" on page 66.
Tap OPEN: the door unlocks.
9
If required, enter your credentials
10
and confirm the release of the load
if needed.
62
SET THE STERILIZATION CYCLE START
You may schedule the start of the sterilization cycles at a certain
date and time (e.g., if you want to load the sterilizer in the evening
and run standard sterilization cycle early the next morning before
office hours). You can set the cycle start date and time and enable
or disable it for each cycle.
On the homepage tap the cycle and
1
.
Tap the leaf icon to set the ECO DRY
2
mode.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl