W&H Lisa VA131-17 Instructions For Use Manual page 106

Diagnostics
ERROR PAGE
During the sterilization cycle, the sterilizer is continuously
monitored by a control system. If an anomaly is detected, the cycle
is aborted automatically, and the sterilizer starts a reset phase.
The following page appears:
WARNING MESSAGES
Message Description
The load is not sterile.
Load not
sterile
WARNING! Do not use items on patients!
The load might be wet.
Drying
interrupted
WARNING! Wet items are for immediate use only!
106
Part Description
A
Current sterilization cycle
B Error number, See "Errors"
on page 100 .
C Warning messages.
D Open button that appears
after the reset phase had
finished.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl