Graphic User Interface; Selecting Panoramic Exposure Program - Planmeca Proline XC User Manual

7 GRAPHIC USER INTERFACE

7.1 Selecting panoramic exposure program

User's manual
To make a selection on the control panel, touch the
screen on a text field or on an icon. For example, to
select the program type touch the Prog. field. You will
hear a signal tone when a field or an icon is activated.
To cancel a selection, touch the Cancel field. Only the
text fields and icons on the screen are touch-sensitive,
and touching the areas outside them will not activate
an action.
NOTE Refer to the Cephalostat user's manual for
information
cephalometric exposure program.
NOTE The radiation dose will be displayed on the
main display in case you have enabled the
DAP function, see section "7.4.2 Behavioural
preferences" on page 24.
To select the panoramic exposure program touch the
Prog. field on the main display. The main display is the
display that is shown when the unit is switched on.
Planmeca Proline XC Panoramic X-ray
GRAPHIC USER INTERFACE
on how to select
Dose Area Product
(DAP)
the
9