RAM 2500 2020 Owner's Manual page 330

328 STARTING AND OPERATING
5. Install and adjust the tension in the weight
distributing bars per the manufacturers'
recommendations so that the height of the
front fender is approximately (H2-H1)/
2+H1 (about 1/2 the difference between
H2 and H1 above normal ride height [H1]).
6. Perform a visual inspection of the trailer
and weight distributing hitch to confirm
manufacturers' recommendations have
been met.
Measurement Example 2500/
Example 3500 Height (mm)
H1
H2
H2-H1
(H2-H1)/2
(H2-H1)/2 + H1
NOTE:
For all towing conditions, we recommend towing
with TOW/HAUL mode engaged.
Towing With All Other 2500/3500 (Non-Air
Suspension)
1. Position the truck to be ready to connect to
the trailer (do not connect the trailer).
2. Measure the height of the top of the front
wheel opening on the fender to ground, this
is height H1.
3. Attach the trailer to the vehicle without the
weight distribution bars connected.
4. Measure the height of the top of the front
wheel opening on the fender to ground, this
is height H2.
1030
5. Install and adjust the tension in the weight
1058
distributing bars per the manufacturers'
28
recommendations so that the height of the
front fender is approximately (H2-H1)/
14
2+H1 (about 1/2 the difference between
1044
H2 and H1 above normal ride height [H1]).
6. Perform a visual inspection of the trailer
and weight distributing hitch to confirm
manufacturers' recommendations have
been met.
Measurement Example 2500/
Example 3500 Height (mm)
H1
H2
H2-H1
(H2-H1)/2
(H2-H1)/2 + H1
NOTE:
For all towing conditions, we recommend towing
with TOW/HAUL mode engaged.
Fifth-Wheel Hitch
The fifth-wheel hitch is a special high platform with
a coupling that mounts over the rear axle of the
tow vehicle in the truck bed. It connects a vehicle
and fifth-wheel trailer with a coupling king pin.
Your truck may be equipped with a fifth wheel
hitch option. Refer to the separately provided
fifth wheel hitch safety, care, assembly, and
operating instructions.
Gooseneck Hitch
The gooseneck hitch employs a pivoted
coupling arm which attaches to a ball mounted
in the bed of a pickup truck. The coupling arm
connects to the hitch mounted over the rear
axle in the truck bed.
1030
1058
28
14
1044