When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may



allow water to get into the power distribution center and possibly result in an electrical system failure.

When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indi-



cated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must

be corrected.

Cartridge Fuse

–

20 Amp Yellow

–

20 Amp Yellow

–

20 Amp Yellow

Micro Fuse

10 Amp Red

Upfitters Box Feed– If Equipped

Rear Heated Seat Right — If Equipped