Front Head Restraint Removal; Rear Head Restraint Adjustment; Rear Head Restraint Removal - RAM 2500 2020 Owner's Manual

40 GETTING TO KNOW YOUR VEHICLE
F H R R
RONT EAD ESTRAINT
To remove the head restraint, push the
adjustment button and the release button while
pulling upward on the whole assembly. To
reinstall the head restraint, put the head
restraint posts into the holes and adjust it to the
appropriate height.
WARNING!
A loose head restraint thrown forward in a

collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the occu-
pant compartment.
ALL the head restraints MUST be rein-

stalled in the vehicle to properly protect the
occupants. Follow the re-installation
instructions above prior to operating the
vehicle or occupying a seat.
R H R A
EAR EAD ESTRAINT
The rear seats are equipped with adjustable
and removable head restraints. To raise the
head restraint, pull upward on the head
restraint. To lower the head restraint, push the
adjustment button located on the base of the
EMOVAL
head restraint and push downward on the head
restraint.
Release/Adjustment Buttons
1 — Release Button
2 — Adjustment Button
NOTE:
The rear center head restraint (Crew Cab)

has only one adjustment position that is used
to aid in the routing of a tether. Refer to
"Occupant Restraint Systems" in "Safety" for
DJUSTMENT
further information.
Do not reposition the head restraint 180

degrees to the incorrect position in an
attempt to gain additional clearance to the
back of the head.
R H R R
EAR EAD ESTRAINT
To remove the head restraint, push the
adjustment button and the release button while
pulling upward on the whole assembly. To
reinstall the head restraint, put the head
restraint posts into the holes and adjust it to the
appropriate height.
NOTE:
To remove outboard restraints, the rear seat
bottom must be folded up.
WARNING!
A loose head restraint thrown forward in a

collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the occu-
pant compartment.
ALL the head restraints MUST be rein-

stalled in the vehicle to properly protect the
occupants. Follow the re-installation
instructions above prior to operating the
vehicle or occupying a seat.
EMOVAL