Tri-Fold Tonneau Cover - If Equipped; Tri-Fold Tonneau Cover Removal - RAM 2500 2020 Owner's Manual

100 GETTING TO KNOW YOUR VEHICLE
TRI-FOLD TONNEAU COVER — IF EQUIPPED
Your vehicle may be equipped with a Tri-Fold
Tonneau Cover which consists of different
features:
Easy Tri-Fold cover

Tonneau fore aft locator

Crossbar inside bed locator

Front and rear clamps

Stowage strap

Locking capability

NOTE:
The Tonneau Cover can be folded up and
secured at the front of the box without removing
it completely.
T -F T C
RI OLD ONNEAU OVER
To remove the Tonneau Cover, follow the next
steps:
1. Open the tailgate to gain access to the rear
pair of Tonneau Cover clamps located on
the underside of the cover (left and right
side).
NOTE:
If clamp wire is damaged replace immediately.
2. Pull both clamp handles down to release
the Tonneau Cover's rear panel.
R
EMOVAL
Clamped Position
Released Position
3. From the released position, send the
clamps to the Stowed Position by pushing
from the yellow bumper up. Listen for a
"clicking" sound to confirm the clamp has
been properly stowed.
Stowed Position
CAUTION!
Make sure the Tonneau Cover clamp and
clamp wire are in the proper stowed position.
If the clamp and clamp wire are not properly
stowed, damage to the Tonneau Cover
material will result.