Driver Memory Settings - If Equipped - RAM 2500 2020 Owner's Manual

door is engaged, that door can only be opened
by using the outside door handle even if the
inside door lock is in the unlocked position.
Child Lock Control
WARNING!
Avoid trapping anyone in the vehicle in a
collision. Remember that the rear doors
cannot be opened from the inside door
handle when the Child Protection Door Locks
are engaged.
NOTE:
After setting the Child-Protection Door Lock

system, always test the door from the inside
to make certain it is in the desired position.
For emergency exit with the system engaged,

move the door lock switch to the unlock posi-
tion, roll down the window, and open the door
with the outside door handle.
DRIVER MEMORY SETTINGS — IF EQUIPPED
Your key fob can be programmed to recall the
same positions when the unlock button is
pushed. This feature allows the driver to store
up to two different memory profiles for easy
recall through a memory switch. Each memory
profile contains desired position settings for the
following features:
Driver seat position

Easy Entry/Exit seat (if equipped)

Side mirrors

Adjustable pedals (if equipped)

A set of desired radio station presets

NOTE:
If equipped with power convex mirrors, these

mirror positions will not set as part of a
memory profile. Refer to "Mirrors" in this
chapter for further information.
GETTING TO KNOW YOUR VEHICLE
Your vehicle is equipped with two key fobs,

one key fob can be linked to memory position
1 and the other key fob can be linked to
memory position 2.
The memory settings switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate

the memory save function.
The (1) and (2) buttons which are used to

recall either of two pre-programmed memory
profiles.
Driver Memory Settings Buttons
31
2