Technical Specifications; Identification Data; Vehicle Identification Number; Brake System - RAM 2500 2020 Owner's Manual

Hide thumbs Also See for 2500 2020:
Table of Contents

Advertisement

452

IDENTIFICATION DATA

V
I
N
EHICLE
DENTIFICATION
The Vehicle Identification Number (VIN) is found
on the left front corner of the instrument panel,
visible through the windshield.

Vehicle Identification Number

NOTE:
It is illegal to remove or alter the VIN.

BRAKE SYSTEM

If power assist is lost for any reason (for
example, repeated brake applications with the
engine off), the brakes will still function.

TECHNICAL SPECIFICATIONS

However, you will experience a substantial
increase in braking effort to stop the vehicle.
UMBER
If either the front or rear hydraulic system loses
normal braking capability, the remaining
system will still function with some loss of
overall braking effectiveness. This will be
evident by increased pedal travel during
application, greater pedal force required to slow
or stop, and activation of the "Brake Warning
Light" and/or the "ABS Warning Light" during
brake use.
H
YDRAULIC
E
QUIPPED
The brake system power assist is provided by a
hydro-boost unit which shares fluid with the
power steering system. You may experience
some clicking or hissing noises from the
hydro-boost system during hard braking
conditions.
NOTE:
Under cold temperatures, pedal effort will be
higher than normal until the power steering fluid
reaches operating temperature.
B
A
— I
RAKE
SSIST
F

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly
calibrated torque wrench using a high quality six
sided (hex) deep wall socket.
T
S
ORQUE
PECIFICATIONS
Lug Nut/
**Lug
Lug Nut/
Bolt
Nut/Bolt
Bolt Type
Torque
Size
130
Ft-Lbs
Cone
(176 N·m)
M14 x
1.50
140
Ft-Lbs
Flanged
(190 N·m)
**Use only authorized dealer recommended
lug nuts/bolts and clean or remove any dirt or
oil before tightening.
Lug Nut/
Bolt
Socket
Size
22 mm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3500 2020

Table of Contents