Table of Contents
Advertisement
applied turn signal (if the left turn signal is
applied and the vehicle departs to the right), the
LaneSense system provides a haptic warning in
the form of torque applied to the steering wheel
to prompt the driver to remain within the lane
boundaries. The LaneSense system will also
provide a visual warning through the instrument
cluster display to prompt the driver to remain
within the lane boundaries.
The driver may manually override the haptic
warning by applying torque into the steering
wheel at any time.
When only a single lane marking is detected
and the driver unintentionally drifts across that
lane marking (no turn signal applied), the
LaneSense system provides a visual warning
through the instrument cluster display to
prompt the driver to remain within the lane.
When only a single lane marking is detected, a
haptic (torque) warning will not be provided.
NOTE:
When operating conditions have been met, the
LaneSense system will monitor if the driver's
hands are on the steering wheel and provides
an audible and visual warning to the driver
when the driver's hands are not detected on the
steering wheel. The system will cancel if the
driver does not return their hands to the wheel.
T
L
S
O
O
URNING
ANE
ENSE
N
The LaneSense button is located on
the switch panel below the Uconnect
display.
NOTE:
If your vehicle is equipped with a 12–inch Ucon-
nect Display screen, the LaneSense button is
located above the display.
To turn the LaneSense system on, push the
LaneSense button (LED turns off). A
"LaneSense On" message is shown in the
instrument cluster display.
Lane Sense On Message
STARTING AND OPERATING
To turn the LaneSense system off, push the
LaneSense button again (LED turns on).
NOTE:
The LaneSense system will retain the last system
O
R
FF
state (on or off) from the last ignition cycle when
the ignition is placed in the ON/RUN position.
L
S
ANE
ENSE
The LaneSense system will indicate the current
lane drift condition through the instrument
cluster display.
When the LaneSense system is on, the lane
lines are gray when both of the lane boundaries
have not been detected and the LaneSense
telltale
is solid white.
System ON (Gray Lines) With White Telltale
307
W
M
ARNING
ESSAGE
5
Hide quick links:
Advertisement
Table of Contents
