Appendix A. Installing Wireless Accessories; Installing The Via Emio-1533 Usb Wi-Fi Module; Figure 92: Installing The Via Emio-1533 Module To The Chassis; Figure 93: Connecting The Usb Wi-Fi Cable (Via Emio-1533) - VIA Technologies VB7009 User Manual

VIA VB7009 User Manual

Appendix A. Installing Wireless Accessories

This chapter provides you with information on how to install the VIA EMIO wireless module into the VIA
VB7009. It is recommended to use a grounded wrist strap before handling computer components.
Electrostatic discharge (ESD) can damage some components.
A.1. Installing the VIA EMIO-1533 USB Wi-Fi Module
Step 1
Mount the VIA EMIO-1533 module to the prepared standoff in the chassis. Align the two mounting holes
on the VIA EMIO-1533 module with the mounting holes on the standoffs. And then secure the VIA EMIO-
1533 module in place with two screws.

Figure 92: Installing the VIA EMIO-1533 module to the chassis

Step 2
Connect one end of USB Wi-Fi cable to pin 1, 3, 5, and 7 of onboard USB 2.0 pin header (USB_4 or
USB_5) on VIA VB7009, and then connect the other end of the cable to the VIA EMIO-1533 module.

Figure 93: Connecting the USB Wi-Fi cable (VIA EMIO-1533)

92