Image Installation; Installing With The Fastboot Mode - VIA Technologies SOM-3000-STK Quick Start Manual

VIA SOM-3000-STK Android 12.0 EVK Quick Start Guide

2. Image Installation

This section explains the setup requirements for installing the Android evaluation image on the VIA SOM-3000
starter kit.
The precompiled images are provided in the "Firmware" folder.

2.1 Installing with the Fastboot Mode

Follow the steps below to install Android EVK image:
Step 1
Prepare the "fastboot tool" and install the "VIA USB driver" into your Windows 10 host machine.
To get the "fastboot tool" for Windows, please refer to the "SDK Platform Tools release notes" chapter on the
Android developer website https://developer.android.com/studio/releases/platform-tools.
To install the "VIA USB driver", right-click "android_winusb" and select "Install".
Then click "Install" when the installer opens.
When the installer finishes, it will show a confirmation message "The operation completed successfully".
Step 2
Connect the Windows 10 host machine and the VIA SOM-3000 starter kit through the Micro USB 2.0 port using
the Micro USB cable.
3