Apm Settings; Power Button Mode; Restore On Ac/Power Loss; Figure 79: Illustration Of Apm Configuration Screen - VIA Technologies VB7009 User Manual

VIA VB7009 User Manual

6.30.6. APM Settings

APM enables the operating system to co-work with the BIOS to control the system power management.
The APM Configuration screen can be used to set a number of power management functions.

Figure 79: Illustration of APM Configuration screen

6.30.6.1. Power Button Mode

The Power Button Mode has three options.
On/Off
When On/Off is selected, pressing the power button will instantly cause the system to power on or off.
Standby
When Standby is selected, the power button must be pressed and held down for 4 seconds before the
system will power off.
Suspend
When Suspend is selected, pressing the power button will instantly cause the system to enter suspend
mode.

6.30.6.2. Restore on AC/Power Loss

Restore on AC/Power Loss defines how the system will respond after AC power has been interrupted
while the system is on. There are three options.
Power Off
The Power Off option keeps the system in an off state until the power button is pressed again.
Power On
The Power On option restarts the system when the power has returned.
Last State
The Last State option restores the system to its previous state when the power was interrupted.
78