2.1.6. USB 2.0 Ports
The VIA VB7009 is equipped with two USB 2.0 ports which gives complete Plug and Play and hot swap
capability for external devices. The USB 2.0 interface complies with USB UHCI, Rev. 2.0. The pinouts of
the USB 2.0 port are shown below.
Figure 11: USB 2.0 port diagram
Pin
Signal
1
+5VSUS
2
Data-
3
Data+
4
GND
Table 7: USB 2.0 port pinouts
2.1.7. Audio Jacks
There are three audio jack receptacles integrated into a single stack on the I/O coastline. Each receptacle
can fit a 3.5mm Tip Ring Sleeve (TRS) connector to enable connections to Line-out Line-in, and Mic-in.
The Line-out jack is for connecting to external speakers or headphones. The Line-In jack is for connecting
external audio devices such as CD player, tape player and etc. The Mic-in jack is for connecting to a
microphone.
Figure 12: Audio jack receptacle stack diagram
Wiring
Tip
Ring
Sleeve
Table 8: Audio jack receptacle pinouts
Line-in
Line-out
Left channel in
Left channel
Right channel in
Right channel
GND
GND
VIA VB7009 User Manual
Mic-in
Left channel
Right channel
GND
11