Resume On Ps/2 Kbc; Wake-Up Key; Wake-Up Password; Resume On Ps/2 Mouse - VIA Technologies VB7009 User Manual

6.30.6.3. Resume on PS/2 KBC

Resume on PS/2 KBC wakes up a system that has been put into suspend or standby mode. When this
feature is enabled, keyboard activity as defined in the Wake-Up Key feature will cause the system to wake
up. This feature has three options.
S3/S4/S5
The S3/S4/S5 option enables PS/2 keyboard activity to be detected if the system is in S3/S4/S5 power
saving mode.
Disabled
The Disabled option disables the detection of all PS/2 keyboard activity.

6.30.6.4. Wake-Up Key

The Wake-Up Key feature can only be set when Resume on PS/2 KBC is set to "S3/S4/S5". Otherwise, this
feature will be not selectable. This feature has two options.
Any Key
The Any Key option enables any key on the keyboard to trigger the Wake-Up event.
Specific Key
The Specific Key option unlocks the Wake-Up Password feature.

6.30.6.5. Wake-Up Password

The Wake-Up Password feature can only be set when the Wake-Up Key feature is set to "Specific Key".
This feature enables the user to specify a key sequence that must be entered in order to wake up the
system.
The key sequence can consist of up to 6 alphanumeric characters and some special characters. Function
keys and modifier keys (such as Ctrl, Alt, Del, etc.) cannot be used.

6.30.6.6. Resume on PS/2 Mouse

Resume on PS/2 Mouse wakes up a system that has been put into suspend or standby mode. When this
feature is enabled, any PS/2 mouse activity that is detected will cause the system to wake up. This feature
has three options.
Note:
This feature supports Erp/Eup provision.
S3
The S3 option enables any PS/2 mouse activity to be detected if the system is in S3 power saving mode.
S3/S4/S5
The S3/S4/S5 option enables any PS/2 mouse activity to be detected if the system is in S3/S4/S5 power
saving mode.
Disabled
The Disabled option disables the detection of all PS/2 mouse activity.

6.30.6.7. PCI LAN S5 Wakeup

The PCI LAN S5 Wakeup feature enables the BIOS to allow remote wake-up from the S5 power off state
through the PCI bus. This feature has two options: "Enabled" or "Disabled" support PCI LAN S5 Wakeup.

6.30.6.8. Resume on RTC Alarm

Resume on RTC Alarm can only be used if Resume on Software RTC Alarm is not enabled. This feature
enables the BIOS to automatically power on the system at a scheduled time. When enabled, the RTC
Alarm Date and System Time features will be unlocked.
VIA VB7009 User Manual
79