EMC VNX Series Hardware Information Manual page 66

Hide thumbs Also See for VNX Series:
Table of Contents

Advertisement

I/O modules
Two-port 10-Gb/s optical I/O module
66
VNX5500 Hardware Information Guide
Table 37 Two-port 10-Gb/s optical I/O module LEDs
LED
Color
State
Power/Fault
Green
On
Amber
On
Off
Link
Green
On
Off
Activity
Amber
Blinking
Off
The two-port 10-Gb/s optical or active Twinax I/O module (labeled 10 GbE v3 on the latch
handle) comes with two optical or ports, one power/fault LED, and a link and activity LED
for each port
(Figure
50). The optical ports on this I/O module can interface at speeds of
10 Gb/s. The two-port 10-Gb/s optical I/O module uses the SFP+ transceiver module. For
more information about SFP modules, see the sentences describing the SFP+ in the
"Four-port 8-Gb/s FC I/O module"
module uses the SFP+ transceiver module, hence the required SFP+ transceiver module
uses a different part number (for part number label location, see the
Location Guide
).
Note: This I/O module requires software release VNX OE for File 7.1 to function properly.
Consequently, you cannot mix this I/O module (version 3) with the two-port 10-Gb/s
optical or active Twinax I/O module (version 2) as described in the
optical I/O module"
section on
optical or active Twinax I/O module that only functions in VNX OE for File 7.0 with a version
3 two-port 10-Gb/s Ethernet I/O module, you must replace all of the version 2s of the
two-port 10-Gb/s Ethernet optical or active Twinax I/O modules with version 3s of the
two-port 10-Gb/s Ethernet I/O module that function in VNX OE for File 7.1. To determine
the correct version number, look at the label on the latch handle. It will say either v2 or v3
along with the name of the I/O module on the label. Also, refer to the
Location Guide
for the location of the part number label.
Description
I/O module is powered up.
I/O module has faulted.
I/O module is powered down.
Network connection
No network connection
Transmit/receive activity
No activity
section on
page
47. The two-port 10-Gb/s optical I/O
page
64. If you replace a version 2 two-port 10-Gb/s
VNX5500 Parts
"Two-port 10-Gb/s
VNX5500 Parts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vnx5500

Table of Contents