EMC VNX Series Hardware Information Manual page 16

System component description
Control Station front view
16 VNX5500 Hardware Information Guide
Table 3 describes the Block and File (Unified) VNX5500 platform disk processor and
2.5-inch disk drive status LEDs.
Table 3 VNX5500 platform 3U, 25 DPE and disk drive status LEDs
LED
DPE fault (location 2)
DPE power (location 3)
Disk drive fault (location 4)
Disk drive on/activity
(location 5)
On the front, the Block and File (Unified) VNX5500 platform Control Station includes the
following:
DVD-ROM drive
◆
USB 2.0 connector (not used)
◆
Control switch and status LEDs
◆
Figure 6 shows the orientation of these components.
1
DVD
1 DVD-ROM drive
2 Control Station switch and status LEDs (for
a closer view, see Figure
Figure 6 VNX5500 Control Station (front view)
Color State
Amber On
Blue On
— Off
Amber On
— Off
Blue On
Blinking
3
2
3 USB 2.0 connector (not used)
6)
Description
Fault has occurred
Powering and powered up
Powered down
Fault has occurred
No fault has occurred
Powering and powered up
Disk drive activity
CNS-001740