VNX5500 rear view
Standby power supply rear view
Power supply/cooling (fan) module LED
The power supply/cooling (fan) modules have a status LED on the front.
the LED for the power supply/cooling (fan) modules.
Power supply/
cooling (fan) power/fault LED
AC
Figure 10 Power supply/cooling (fan) module LED
Table 8
describes the power supply/cooling module (fan) status LED.
Table 8 Power supply/cooling (fan) module LED
LED
Color
State
Power/Fault Green
On
Amber
Blinking
Amber
On
On the rear, a Block and File VNX5500 platform includes the following hardware
components:
One dual 1U SPS
◆
One 3U DPE with two storage processors (SPs), each SP (A and B) having one CPU
◆
module and one power supply module
One to two 1U Control Stations
◆
One to two 2U Data Mover enclosures with one, two, or three Data Movers
◆
The Block and File (Unified) VNX5500 platform includes a dual 1U, 1.2-kilowatt standby
power supply (SPS) to maintain power to the Block and File (Unified) VNX5500 platform
SP during power loss. Within the SPS, a built-in DC battery pack is charged by way of an
AC-DC converter. AC input power from the power distribution unit (PDU) goes into the SPS
AC power inlet to the AC-DC converter. This converter then converts the AC power to DC
power, which is then stored in to the built-in DC battery pack. When emergency power is
needed by the Block and File (Unified) VNX5500 platform SP, a second DC-AC converter
AC
Description
Normal (no faults detected)
Power supplied but external fault detected
No power
VNX5500 Hardware Information Guide
System component description
Figure 10
shows
AC
AC
CNS-001673
21