EMC VNX Series Hardware Information Manual page 52

I/O modules
52 VNX5500 Hardware Information Guide
page 47). The two-port 10-Gb/s optical I/O module uses iSCSI protocol, hence the
required SFP+ transceiver module uses a different part number (for part number label
VNX5500 Parts Location Guide
location, see the
offload engine (or TOE).
1 2
3
4
5
CNS-001756
1 Push button latch handle
2 Power/fault LED
3 SFP+ (optical) port (two)
Figure 44 Two-port 10-Gb/s optical I/O module
Two-port 10-Gb/s optical I/O module LEDs
The two-port 10-Gb/s optical I/O module has three types of status LEDs.
the LEDs and Table 30 on page 53
Power/fault LED
Link LED
Activity LED
Link LED
Activity LED
Figure 45 Two-port 10-Gb/s optical I/O module LEDs
). This I/O module also includes a TCP
4 SFP+ link LED (right)
5 SFP+ NIC activity LED (left)
describes them.
CNS-001672
Figure 45 shows