System component description
28
VNX5500 Hardware Information Guide
SP AC power supply
Figure 17
shows an example of the SP AC power supply/cooling module with an AC
(power in) recessed connector (plug) and status LEDs. The SP is cooled by this power
supply/cooling module on top.
Do not
remove the SP power supply/cooling module while the SP is plugged in. Removing
the power supply module for more than a few minutes can cause the SP to shut down due
to lack of cooling.
Power on LED
Power fault LED
Power supply in
Figure 17 SP AC power supply module (power in) recessed connector (plug) and status LEDs
Table 11
describes the power supply/cooling module (fault and power on) LEDs.
Table 11 SP AC power supply/cooling module (fault and power on) LEDs
Led
Color
Fault
Amber
—
Power
Green
—
Table 12
describes the SP LEDs. The locations in
page
27.
Table 12 SP LEDs
Led
Color
Unsafe to
White
remove
—
(location 10)
VNX-000108
State
Description
On
Power supply or backup fault, check cable
connection
Blinking
BIOS, POST and OS booting up or system
overheating
Off
No fault or power off
On
Power on
Off
Power off, verify source power
Table 12
State
Description
Do not
On
remove SP
Off
Safe to remove SP
are shown in
Figure 16 on