How This Document Is Organized - EMC VNX Series Hardware Information Manual

How this document is organized

Related documentation
The major sections of this guide are listed in the following table.
Title
"Overview" on page 4
"VNX5500 Block and File
product description" on page 6
"System component
description" on page 12
"DPE front views" on page 12
"Control Station front view" on
page 16
"DME front view" on page 19
"Standby power supply rear
view" on page 21
"DPE rear view" on page 26
"Control Station rear view" on
page 38
"DME rear view" on page 43
"Disk-array enclosure" on
page 71
"VNX5500 DAE cabling" on
page 104
EMC provides the ability to create step-by-step planning, installation, and maintenance
instructions tailored to your environment. To create VNX customized documentation, go
to: https://mydocs.emc.com/VNX/.
To download a PDF copy of the desired publication, go to the following sections:
For hardware-related books, go to the About VNX section, and then select Learn about
◆
VNX. Next, follow the steps in the wizard.
For technical specifications, go to the About VNX section, and then select View
◆
technical specifications. Next, follow the steps in the wizard.
Description
Describes the software and hardware features of a typical
VNX5500 along with a front view example of the VNX5500.
Describes and shows the front and rear views of a typical
VNX5500.
Provides a description of the components that comprise a
VNX5500. Along with a description, illustrations of each
component are also shown.
Describes and illustrates the front of a DPE and the components
that comprise the front of the DPE.
Describes and illustrates the front view of the Control Station
used in the VNX5500.
Describes and illustrates the front of the DME and the
components that comprise the front of the DME.
Describes and illustrates the 1U SPS used in the VNX5500.
Describes and illustrates the rear of a DPE and the components
that comprise the rear of the DPE.
Describes and illustrates the rear view of the Control Station
used in the VNX5500.
Describes and illustrates the rear of the DME and the
components that comprise the rear of the DME.
Describes and illustrates the three types of DAEs available for
the VNX5500.
Describes the types of DAE cabling available for the VNX5500
platform. The cabling can be either interleaved or stacked
depending on your specific requirements.
VNX5500 Hardware Information Guide
How this document is organized
3