EMC VNX Series Hardware Information Manual page 33

Table 15 describes the SP 8-Gb/s FC port LEDs.
Table 15 8-Gb/s FC port LEDs
Led Color
Link/Activity Green
(each port has
Blue
one LED)
Green or
Blue
—
VNX5500 Parts Location Guide
1. Refer to the
Network management and service laptop Ethernet (RJ-45) ports
The SP Ethernet (RJ-45) ports are LAN ports not WAN ports. LAN ports contain safety
extra-low voltage (SELV) circuits, and WAN ports contain telephone-network voltage (TNV)
circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when
connecting cables. To avoid electric shock, do not connect TNV circuits to SELV circuits.
The Block and File (Unified) VNX5500 platform SP CPU comes with two integrated
dual-port Ethernet ports (labeled with a network management symbol and a wrench
symbol, respectively). These ports provide an interface for connecting to the public LAN
and a service laptop computer, respectively. The ports are 8-pin MDI RJ-45 type ports for
either IEEE 802.3 10BASE-T (10 Mb/s), IEEE 802.3u 100BASE-TX (100 Mb/s), or
1000BASE-T (1000 Mb/s) Ethernet connections.
Figure 23 shows an example of the SP SP network management and service laptop
Ethernet (RJ-45) ports.
Figure 23 Network management and service laptop Ethernet (RJ-45) ports
IMPORTANT
The ports shown in Figure 23
a line through it indicates that you should not connect WAN type RJ-45 telephone
connectors to these ports.
State Description
On 2- or 4-Gb/s link speed (suboptimal speed)
On 8-Gb/s link speed (maximum speed)
Blinking Small form-factor pluggable (SFP+
module faulted, unsupported, or optical cable fault.
Off No network connection
for the part number label location for the SFP+ part number.
VNX-000095
are LAN ports. A symbol depicting a telephone handset with
VNX5500 Hardware Information Guide
System component description
1
) transceiver
33