EMC VNX Series Hardware Information Manual page 10

VNX5500 Block and File product description
10 VNX5500 Hardware Information Guide
Note: Adding the four-port 6-Gb/s SAS I/O module to each SP in the 3U DPE
allows you to increase the back end support of the VNX5500 platform from two
to six back end buses per SP
provides more information).
– One RS-232/EIA 232 serial (up to 115 K baud) service laptop port (micro DB-9)
– One RS-232/EIA 232 serial SPS management (micro DB-9) port
– One 10/100/1000 LAN management (RJ-45) port
– One 10/100/1000 LAN service (RJ-45) port
– One power supply (hot-swappable)
One dual 1U standby power supply (SPS)
◆
One to two 2U DMEs with first DME having two Data Movers and the second (optional)
◆
having from zero to one Data Mover. Each Data Mover consists of:
• One CPU module consisting of one Intel Xeon 4-core 2.13-GHz processor
• Six DDR3 synchronous dynamic RAM (SDRAM) slots supporting up to 12 GB per
CPU module
• One Fibre Channel (FC) I/O module with a:
Note: The maximum number of I/O modules for the VNX5500 is four per Data
Mover. One FC I/O module and up to three other I/O modules. Any combination of
these I/O modules must be the same for both Data Movers.
– Four-port 8-Gb/s optical (running at 2, 4, or 8 Gb/s); in slot 0 only; labeled
8 GbE Fibre on the latch handle
• One, two, or three of the following network I/O modules in any combination:
– Two-port 10-Gb/s optical or active Twinax
handle
– Two-port 10-Gb/s optical or active Twinax
handle
Note: Version 3 of the two-port 10-Gb/s optical or active Twinax I/O module
requires VNX OE File version 7.1 or later.
– Four-port 1-Gb/s copper; labeled 1 GbE on the latch handle
– Two-port 1-Gb/s copper plus two-port 1-Gb/s optical; labeled 1 GbE on the
latch handle
– Two-port 10-Gb/s RJ45 Base-T iSCSI/IP; labeled 10 GbE Base-T on the latch
handle
Note: The two-port 10-Gb/s RJ-45 Base-T/IP I/O module requires VNX OE for File
version 7.1 or later.
1. The two-port 10-Gb/s I/O modules can also use active twinaxial (Twinax) cables. Twinax is a type
of cable similar to coax, but with two inner conductors instead of one. These cables will be
supplied in lieu of SFP+ when so ordered.
("Four-port 6-Gb/s SAS I/O module" on page 54
1
; labeled 10 GbE v2 on the latch
5
; labeled 10 GbE v3 on the latch