Network management and service laptop Ethernet (RJ-45) port LEDs —
the SP Ethernet (RJ-45) port LEDs—a green LED to the left of the connector and a bi-color
(green/amber) LED to the right of the connector—that indicate the link/activity and speed
of the Ethernet ports, respectively.
1
2
VNX-000110
Figure 25 SP Ethernet (RJ-45) port LEDs
Table 18
describes the link/activity and connection speed associated with the SP
Ethernet (RJ-45) port LEDs.
Table 18 Network management and service laptop Ethernet (RJ-45) port LEDs
Led
Color
Left, link
Green
(location 1)
Green
—
Right, link
Green
speed
Amber
(location 2)
—
SP serial RS-232/EIA 232 (micro DB-9) socket connector
The back of the Block and File (Unified) VNX5500 platform SP CPU module includes a
standard serial Electronics Industries Association (EIA) RS-232 interface (micro DB-9)
connector (labeled with a symbol depicting a wrench on the upper left) to connect to a PC
or service laptop computer. This serial connector (port) allows you to access the SP locally
by connecting a terminal—either a PC running terminal-emulation software or an ASCII
terminal—to the port.
Notice the orientation of the pins shown in
Pin 1
5
6
9
VNX-000079
Figure 26 Serial RS-232/EIA 232 (micro DB-9) connector (socket) for service laptop
State
Description
On
Network/link connection
Blinking
Transmit/receive activity
Off
No network/link connection
On
100-Mb/s connection
On
1000-Mb/s (or 1-Gb/s) connection
Off
10-Mb/s connection (if left LED is on or blinking)
Figure
26.
VNX5500 Hardware Information Guide
System component description
Figure 25
shows
35