EMC VNX Series Hardware Information Manual page 58

I/O modules
Data Mover I/O module types
58 VNX5500 Hardware Information Guide
Two-port 10-Gb/s RJ-45 Base-T I/O module LEDs
The two-port 10-Gb/s RJ-45 Base-T I/O module has three types of status LEDs.
shows the LEDs and Table 33
Power/fault LED
Link LED
Activity LED
Activity LED
VNXe-000752
Figure 51 Two-port 10-Gb/s RJ-45 Base-T I/O module LEDs
Table 33 Two-port 10-Gb/s RJ-45 Base-T I/O module LEDs
LED Color State
Power/Fault Green On
Amber On
— Off
Link Green On
— Off
Activity Amber Blinking
— Off
The following I/O module types are supported by the VNX5500 Data Mover:
"Four-port 8-Gb/s FC I/O module" on page 59
◆
"Four-port 1-Gb/s copper I/O module" on page 61
◆
"Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module" on page 63
◆
"Two-port 10-Gb/s optical I/O module" on page 64
◆
"Two-port 10-Gb/s optical I/O module" on page 66
◆
"Two-port 10-Gb/s RJ-45 Base-T iSCSI/IP I/O module" on page 69
◆
describes them.
Link LED
Description
I/O module is powered up.
I/O module has faulted.
I/O module is powered down.
Network connection
No network connection
Transmit/receive activity
No activity
Figure 51