EMC VNX Series Hardware Information Manual page 63

Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
The two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module (labeled 1 GbE on
the latch handle) comes with two copper ports and two optical ports, one power/fault
LED, and a link and activity LED for each port, as shown in
this I/O module can interface at speeds of 10 Mb/s, 100 Mb/s, and 1000 Mb/s (1 Gb/s).
While the optical ports can interface at a speed of 1 Gb/s.
1 2
3
4
5
6
7
8
CNS-001755
1 Push button latch handle
2 Power/fault LED
3 SFP+ (optical) port (two)
4 SFP+ link LED (right)
Figure 56 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
Figure 56. The copper ports on
5 SFP+ activity LED (left)
6 RJ-45 (copper) port (two)
7 RJ-45 link LED (right)
8 RJ-45 activity LED (left)
VNX5500 Hardware Information Guide
I/O modules
63