How This Document Is Organized; Related Documentation - EMC VNX5700 Hardware Information Manual

How this document is organized

Related documentation

The major sections of this guide are listed in the following table.
Title
"Overview" on page 6
"VNX5700 Block and File
product description" on page 8
"System component
description" on page 17
"SPE front view" on page 17
"DME front view" on page 20
"Control Station front view" on
page 23
"1U SPS rear view" on page 26
"2U SPS rear view" on page 30
"SPE rear view" on page 33
"DME rear view" on page 37
"Control Station rear view" on
page 40
"Disk-array enclosure" on
page 63
"VNX5700 DAE cabling" on
page 96
EMC provides the ability to create step-by-step planning, installation, and maintenance
instructions tailored to your environment. To create VNX customized documentation, go
to: https://mydocs.emc.com/VNX/.
To download a PDF copy of the desired publication, go to the following sections:
For hardware-related books, go to the About VNX section, and then select Learn about
◆
VNX. Next, follow the steps in the wizard.
For technical specifications, go to the About VNX section, and then select View
◆
technical specifications. Next, follow the steps in the wizard.
Description
Describes the software and hardware features of a typical
VNX5700 along with a front view example of the VNX5700.
Describes and shows the front and rear views of a typical
VNX5700.
Provides a description of the components that comprise a
VNX5700. Along with a description, illustrations of each
component are also shown.
Describes and illustrates the front of an SPE and the
components that comprise the front of the SPE.
Describes and illustrates the front of the DME and the
components that comprise the front of the DME.
Describes and illustrates the rear view of the Control Station
used in the VNX5700.
Describes and illustrates the 1U SPS used in the VNX5700.
Describes and illustrates the 2U SPS used in the VNX5700.
Describes and illustrates the rear of an SPE and the
components that comprise the rear of the SPE.
Describes and illustrates the rear of the DME and the
components that comprise the rear of the DME.
Describes and illustrates the rear view of the Control Station
used in the VNX5700.
Describes and illustrates the three types of DAEs available for
the VNX5700.
Describes the types of cabling available for the VNX5700
platform. The cabling can be either interleaved or stacked
depending your specific requirements.
VNX5700 Hardware Information Guide
How this document is organized
5