How This Document Is Organized; Related Documentation - EMC VNX Series Parts Location Manual

How this document is organized

Related documentation

The major sections of this guide are listed in the following table.
Title
"VNX7500 Block and File
platform stackup" on page 4
"VNX7500 components" on
page 9
"Standby power supplies
(SPSs)" on page 9
"Storage processor enclosure
(SPE)" on page 11
"Data Mover enclosure" on
page 18
"I/O modules" on page 23
"Small form-factor pluggable
(SFP)" on page 36
"DIMMs" on page 39
"Disk-array enclosure (DAE)" on
page 43
EMC provides the ability to create step-by-step planning, installation, and maintenance
instructions tailored to your environment. To create VNX customized documentation, go
to: https://mydocs.emc.com/VNX/.
To download a PDF copy of the desired publication, go to the following sections:
For hardware-related books, go to the About VNX section, and then select Learn about
◆
VNX. Next, follow the steps in the wizard.
For technical specifications, go to the About VNX section, and then select View
◆
technical specifications. Next, follow the steps in the wizard.
For installation, adding, or replacing tasks, go to the VNX tasks section, and then
◆
select the appropriate heading. For example, to download a PDF copy of the
Block Installation Guide
For server-related tasks, go to the Server tasks for the VNX5300, VNX5500, VNX5700,
◆
and VNX7500 section, and then select the appropriate heading. For example, to
download a PDF copy of Adding or replacing hardware, go to Add or replace hardware
and follow the steps in the wizard.
Description
Describes and shows the front and rear views of a typical
VNX7500.
Provides a description of the components that comprise a
VNX7500. Along with a description, illustrations of each
component are also shown.
Describes and illustrates the part number label locations of the
SPS.
Describes and illustrates the part number label locations of an
SPE and the components that comprise the SPE.
Describes and illustrates the part number label locations of the
DME and the management module.
Describes and illustrates the part number label locations of the
I/O modules that comprise the SPE and the DME.
Describes and illustrates the part number label locations of the
SFP transceiver modules used in the DME.
Describes and illustrates the part number label locations of the
memory module or dual-inline memory modules (DIMMs) used
in the DPE and the DME.
Describes and illustrates the part number label locations of the
three types of DAEs available for the VNX7500.
, go to Install VNX and follow the steps in the wizard.
EMC VNX7500 Parts Location Guide
How this document is organized
VNX7500
3