How To Move A Route Point On A Route; How To Delete A Point (Incl. Route Point) On A Route; How To Extend A Route - Furuno NavNet TZtouch3 Series Operator's Manual

5.3.2

How to move a route point on a route

You can move a route point on a route as follows.
1. Tap a route point on a route to display the pop-up menu.
For example, point #3 in the figure below will be moved.
2. Tap [Move]. The selected route point is highlighted.
3. Move the route point to the new position by dragging the route point or tapping the
new position.
4. Tap [End Move] at the top right-hand corner of the screen.
5.3.3

How to delete a point (incl. route point) on a route

You can delete a point on a route.
1. Tap the point to show the pop-up menu.
2. Tap [Delete]. The selected point is deleted, and the succeeding route points are
renumbered.
Note: If the point tapped at step 1 is a point icon, only the point icon is erased. To
erase the route point, do steps 1 and 2 again.
5.3.4

How to extend a route

You can extend a route from the last route point on the route.
1. Tap a route leg to display the pop-up menu.
2. Tap [Extend].
3. Tap a position. A light-blue line with arrow runs from the last route point to the se-
lected position.
4. Repeat step 3 to enter more route points, if necessary.
5. At the last route point, tap [End Route] at the top right-hand corner of the screen
to complete the route and save the route to the [Routes] list.
5. ROUTES
5-5