File Operations; File Format - Furuno NavNet TZtouch3 Series Operator's Manual

9.

FILE OPERATIONS

Points, tracks, boundaries, routes and settings can be read and written using the USB
port. Additionally with a My Time Zero
My Time Zero
croSD cards, and is exclusively for use with chart cards (data cannot not written to or
read from a micro SD card).
The table below outlines the media that can be used with your unit.
Action
Write data
Read data
Note: For care and handling of microSD cards see section 1.11.
Handling USB flash memory
• Format the USB flash memory or SD card to file system FAT32. The capacity of the
media should be 32GB or less.
• Do not use a secure USB flash memory.
• Turn off the power before inserting or removing the media connected to the USB
port, to prevent corruption of data.
9.1

File Format

You can select the file format to use to export data.
1. Open the Home screen, then tap [Settings]→[Files].
2. Tap [Export File Format].
3. Tap desired file format, among [TZD], [CSV], [GPX].
[TZX]: For NavNet TZtouch3
™
* data service cloud. The card slot at the back of the MFD holds mi-
MicroSD CARD
SD Card Unit (SDU-
001, option)
Yes
Yes
™
* account, you can save settings data to the
SD card
converter
adapter
Yes
Yes
USB flash
memory
Yes
Yes
9-1