How To Show Or Hide The Depth And Frequency Indications - Furuno NavNet TZtouch3 Series Operator's Manual

8.2.5

How to show or hide the depth and frequency indications

You can show or hide the depth and TX frequency at the bottom left corner of the
screen.
1. Open the layers menu.
2. Select [ON] or [OFF] for [Depth Information].
8.2.6 Availability of points and event marks registration, and go to a
point
For operation, see chapter 4.
The table below shows function availability according to latitude/longitude, heading
data presence or absence. If there is no latitude/longitude data, none of the functions
below are available.
Item
Point registration
Go to point
Event mark registration
Item
Point registration
Go to point
Event mark registration
For starboard, downward, and port, see the illustration "Triple beam
display" on page 8-2.
Latitude/Longitude / Heading data: YES
Starboard
Yes
Yes
Yes
Latitude/Longitude: YES, Heading data: NO
Starboard
No
No
No
8. MULTI BEAM SONAR DFF-3D
Downward
Yes
Yes
Yes
Downward
Yes
Yes
Yes
Port
Yes
Yes
Yes
Port
No
No
No
8-5