Facsimile Receiver Fax-30 - Furuno NavNet TZtouch3 Series Operator's Manual

Menu item
[Quick Self Test]
[Certification Mark]
[Service]
[Event Input
Configuration]
[Update Network
Equipments]
[Sirius Radio
Diagnostic]
[Sirius Weather
Diagnostic]
[Reset Default
Settings]
15.4

Facsimile Receiver FAX-30

The FURUNO Facsimile Receiver FAX-30 installs in the NavNet TZtouch3 network
and can be controlled from a NavNet TZtouch3 display. Below are the steps to start
fax operation.
1. Connect the FAX-30 to the NavNet TZtouch3 network.
2. Open the home screen, then tap [FAX-30] (left side of screen).
3. Tap [WX FAX] or [NAVTEX].
4. Refer to the Operator's Manual of the FAX-30 for operation information.
Description
Information for this equipment and connected sensors.
Show the certification marks this equipment has received.
Requires login password. For the service technician only.
Select the data to be entered as an event.
Updates all NavNet equipment in the network. For the service technician.
Check the satellite radio of the FURUNO BBWX weather receiver for proper
operation. See section 13.7.3.
Check the weather section of the FURUNO BBWX weather receiver for
proper operation. See section 13.6.
Restore default settings for the [Initial Setup] menu.
FAX-30 Browser
FAX-30 Browser
15. OTHER FUNCTIONS
Option (setting range)
[Off], [Event Mark],
[MOB], [Ferry]
15-11