Cog Vector Length - Furuno NavNet TZtouch3 Series Operator's Manual

2. CHART PLOTTER
2.5.3

COG vector length

The COG vector can be set to show one of the following:
• Position after traveling the distance set in the menu.
• Estimated position after traveling the time set in the menu.
The tip of the vector is the estimated position of your ship at the end of the selected
time or distance. The greater the distance or the time, the longer the COG vector. To
change the COG vector length, do the following.
1. Open the home screen, then tap [Settings] → [Ship & Track] → [COG Vector].
2. Tap [Distance] or [Time] as required, then tap the [<] icon at the title bar.
If you selected [Distance], go to step 3. For [Time], go to step 5.
3. Tap [COG Vector Length] to display the software keyboard.
4. Set the length for the COG vector, then tap [ ]. Go to step 6.
5. Tap [COG Vector Time], then tap the time for the COG vector.
6. Tap the close button to finish.
2-5