System Configuration - Furuno NavNet TZtouch3 Series Operator's Manual

SYSTEM CONFIGURATION

TZT12F System configuration
Radar Sensor (Radome)
DRS4DL/DRS4DL+/DRS4D-NXT
DC12-24V
: Standard supply
: Optional/local supply
Control Unit MCU-005
FA-40/70
Autopilot
NAVpilot-300/
NAVpilot-711C
SCX-20
SC-30/33
GP-330B
FI-50/70
IF-NMEA2K2
IF-NMEAFI
Category of units
Antenna unit: Exposed to the weather.
Other units: Protected from the weather.
* 1 : This unit has a built-in fish finder as standard.
2
* : A maximum of 6 units of NavNet TZtouch2/3 can be connected. NavNet TZtouch2 requires software
version 7, which is to be released in Spring 2020. For configurations with TZT2BB included, a
maximum of 4 NavNet TZtouch2/3 units can be connected. NavNet TZtouch cannot be connected.
3
* : Use a commercially available PoE hub. "GS108PE" of NETGEAR has tested compatible.
The basic functions of the hub were verified, however the compatibility of all functions were not
checked. FURUNO cannot guarantee proper operation.
* 4 : The HDMI output resolution is fixed to 1280×800. To use a touch monitor for operation, its
resolution must be 1280×800 (Aspect ratio 16:9) and with HPD (Hot Plug Detection) function.
* 5 : Some transducers require connection of 12-10 pin conversion cable.
DRS6A X-Class/DRS12A X-Class/DRS25A X-Class
Select an antenna type:
Radome or Open.
Ethernet
Hub*
HUB-101
PoE Hub* 3
Junction
Box
FI-5002
Multi Function Multi Function
Ship's main
12 to 24V DC
Transducer*
Radar Sensor (Open)
DRS6A-NXT/DRS12A-NXT/DRS25A-NXT
DC24V
FAR-2xx7/2xx8 series
FAR-15x3/15x8 series
BBDS1, DFF series
Multi-beam Sonar DFF-3D Multi-beam Sonar DFF-3D
FA-30/50
2
FAX-30
IP Camera
FUSION-Link compatible devices
USB Hub
Display Display
1 1
TZT12F* TZT12F*
Fish Finder
Power Amplifier
or or DI-FFAMP
5
Transducer
Control Unit
MCU-002/MCU-004 or
SD Card Unit SDU-001
Touch Monitor* 4
(HDMI Output)
CCD Camera
CCD Camera
Event Switch
External Buzzer
Power Switch
NMEA0183 Output
xvii