Summary of Contents for Furuno NavNet TZtouch3 TZT9F
Page 1
The screenshots used in this guide were mainly taken from the TZT19F. Operational Overview Icon (home/displays), power switch operations TZT16F/TZT19F TZT16F/TZT19F FURUNO icon FURUNO icon Displays the Display icons home screen. TZT9F/ TZT9F/ (max.
Swipe leftward from the right edge. (To switch between menus, swipe, Icon color and function state or tap applicable tab.) Yellow: ON, White: OFF Settings menu Tap the FURUNO icon. Tap [Settings]. Drag to find required Tap the required menu item. menu, then tap item.
Chart Plotter Event icon Navigation bar Center 192.0 48.4° 1d08h 1d08h Vessel Depth Alarm Undo, Redo Data Data icons area area Status bar Status bar Scale slider COG vector COG vector ([+], [-] icons) (dashed line) (dashed line) Heading Heading line line Track...
Page 4
Points/boundaries Points can be entered on the chart plotter display (radar, fish finder and weather displays also) to mark important locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the Points list. Also, boundaries can be set at the position desired (net position, area to avoid, etc.). How to enter a point The point is entered Tap where to enter a point.
Page 5
Routes A route is comprised of a series of waypoints leading to a destination. Routes are saved to the routes list. How to create a new route Tap the first point for Tap the next point for the route. the route. Repeat to enter all points for the route.
Page 6
Radar Move own ship Guard zone Guard zone Heading line Heading line North mark North mark position to center [+]: Increase range [-]: Decrease range Data area Range Own ship position Own ship position Fixed range rings How to switch between standby and TX How to switch between standby and TX : TX (lower left side of...
How to measure the range, bearing from own ship to a target Goto Goto Goto Target Target Tap a target to show its range and bearing from own ship. How to set a guard zone How to set a guard zone A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you specify.
ARPA Operation ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision. ARPA not only tracks other ships but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually. How to show, hide ARPA symbols ARPA symbols ON ARPA symbols OFF...
Page 9
CPA/TCPA alarm The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when both the CPA and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting. CPA: Closest point of approach TCPA: Time to closest point of approach How to set the CPA/TCPA alarm How to set the CPA/TCPA alarm...
(Automatic Identification System) How to show or hide AIS target symbols How to show or hide AIS target symbols AIS symbols ON AIS s AIS symbols OFF Open the Layers menu, tap the [Overlays] tab. target symbols target symbols Class A AIS Class B AIS BFT* AIS SOG and...
Fish Finder Home icon Event icon [+]: Zoom in [-]: Zoom out Water temp Water temp Depth Depth graph* graph* scale scale Water Fish symbol * Fish symbol * Bottom echo Bottom echo temp. scale* A-scope Depth From top: Frequency selection switch Frequency selection switch Unit, Temp.
How to select the operating mode How to select the operating mode The fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and TVG are automatically adjusted. Auto mode Open the Layers menu, tap the Manual [Fish Finder] tab.
Zoom display Bottom Lock Search for bottom fish. 20.5 200 kHz Show the Layers Bottom Zoom menu. - Short tail indicates Find bottom contour and soft bottom. hardness. - Long tail indicates hard bottom. 20.5 Marker Zoom Help determine the size of a *: Zoom zone is school of fish in the middle layer.
Instrument Display With connection of appropriate sensors, the instrument display shows various navigation data. How to enable the instrument display Add the instrument display icon to the home screen to show the instrument display. TZT19F Drag After setting, tap [ ]. (Incorporation in 3, 4-way screen is also possible.) How to switch instrument displays (ex.
Wireless LAN Settings You can connect to the internet with the wireless LAN signal to download weather information, update the software, and connect to an iPhone, iPod, iPad, or Android device, to operate and monitor a NavNet TZtouch3 device. How to connect to an existing LAN Connect to the existing LAN to download weather data or update the software.
Page 16
How to create a local wireless network Create a local wireless network to connect to an iPhone, iPod, iPad, or Android device. Check that [When Necessary] is selected. Home screen Select [Create Local Network], then tap “<”. Check that [OFF] is selected. XXXXXXXX Enter the name of the network, then tap [ ].