My Friends (Social Network); How To Setup My Friends; How To Show Or Hide The My Friends Display - Furuno NavNet TZtouch3 Series Operator's Manual

2.14

My Friends (Social Network)

The My Friends feature marks (with a symbol), on the Plotter and Weather displays,
the locations of the vessels registered to the My Friends function (see 2.15.1). A ves-
sel must be equipped with NavNet TZ Touch 3 version 3.01 or higher, be logged into
your My TimeZero
WLAN range are shown.
2.14.1

How to setup My Friends

1. Open the [Settings]-[General] menu.
2. Login to your My TimeZero
3. At the [Nickname] field in the [MY FRIENDS] section, the name used to register
your My TimeZero
the keyboard, then enter a name.
4. Tap [Manage My Friends] in the [MY FRIENDS] section.
5. Tap [+ Add].
6. Enter friend's e-mail address then tap [Send].
7. When the friend approves your invitation, The "You have xx friend" will reflect the
addition.
2.14.2

How to show or hide the My Friends display

On the chart plotter display or weather display, open the [Layers] menu, then turn [My
Friends] on or off as required.
When the My Friends display is active, the vessels that you have registered (see
subsection 2.14.1) are marked with a symbol, as shown in the figure below. Tap the
symbol to show detailed information about the vessel.
My Friends
symbol
™
account and have My Friends activated. Only friends within the
™
account at the [SOCIAL NETWORK] section.
™
account is shown. If desired you can change the name. Tap
Furuno
Lat N 34°26.400'
Lon E 135°07.104'
COG 179.7°
Furuno
SOG 20.0 kn
2. CHART PLOTTER
Hello, John Smith
Vessel's data
(Name, geographical position,
COG, SOG)
2-31