How To Edit Points; How To Edit An On-Screen Point - Furuno NavNet TZtouch3 Series Operator's Manual

4.10

How to Edit Points

4.10.1

How to edit an on-screen point

1. Tap the point to edit, then tap [Edit] on the pop-up window.
Note: The [ACTIONS] section changes according to route presence, absence.
This figure above shows the items available when one or more routes have been
registered.
2. To change position, tap [Lat Lon] to show the software keyboard.
Units: Open the pull-down menu to change the position display format.
1) Tap numeric keys to enter position; tap the alphabet (N, S, E, W) to switch co-
ordinates.
2) Use the software keyboard to edit the position.
3) Repeat steps 1) - 2) to change the position.
4) Tap [ ] to finish
3. To change point name, tap [Name] to show the software keyboard. See
section 1.15.
1) On the point name field, tap the alphanumeric character to change.
2) Use the software keyboard to enter alphanumeric character.
3) Repeat steps 1) - 2) to change the name.
Edit position
4. POINTS, BOUNDARIES
Switch coordinates
(N↔S, E↔W).
4-13