Page 1
MULTI FUNCTION DISPLAY TZT12F/TZT16F/TZT19F Model Operator’s Guide This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator’s Manual on the WEB site. You can get the latest version of the manual by accessing the quick response code at the back of this guide.
Touchscreen operations Drag, swipe - Select an item on a menu. - Move the chart. - Select an object to show the corresponding - Scroll the menu. pop-up menu. - Show slide menu, layer menu. Pinch Two finger tap Slider bar Slider bar Slider bar Slider bar...
Plotter Heading line (yellowish-green solid line) Alarm Message Alarm Message Data area COG vector (broken line) COG vector (broken line) Return own ship to screen center. Position Lost Left: Undo Right: Back Inactive route (expanded) Point Boat icon Boat icon Slide bar Track Inactive route...
Page 4
Points/boundaries Points can be entered on the plotter display (radar and fish finder displays also) to mark important locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points list. Also, boundaries can be set at the position desired (net position, area to avoid, etc.) How to enter a point The point is entered on the screen.
Routes A route is comprised of a series of waypoints leading to a destination. Routes are saved to the routes list. How to create a new route Tap the next point for the route. Tap the first point for Repeat to enter all points for the route. the route.
Page 6
Radar Guard zone Guard zone Heading line Heading line North mark North mark Move Own ship position to center Data area Slider Range Own ship position Own ship position Fixed range rings How to switch between standby and TX How to switch between standby and TX TX X : TX (lower left side of...
How to measure the range, bearing from own ship to a target Goto Goto Goto Target Target Tap a target to show its range and bearing from own ship. How to set a guard zone How to set a guard zone A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you specify.
ARPA Operation ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision. ARPA not only tracks other ships but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually. How to show, hide ARPA symbols ARPA symbols ON ARPA symbols OFF...
Page 9
CPA/TCPA alarm The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when both the CPA and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting. CPA: Closest point of approach TCPA: Time to closest point of approach How to set the CPA/TCPA alarm How to set the CPA/TCPA alarm...
The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an AIS target is near the alarm value. Home screen Set the alarm value, then tap [ ]. How to show AIS target data How to show AIS target data FURUNO FURUNO 987654321 987654321 AIS symbol AIS symbol...
Fish Finder Home icon Depth scale Temp graph* Temp. scale* Bottom 29.6 ft 29.8 ft Fish symbol echo Bottom echo Slider Requires appropriate transducer. Requires water temperature sensor. A-scope display Depth Frequency Frequency Note: Names of menu items may be changed depending on the transducer connected. Note: Names of menu items may be changed depending on the transducer connected.
How to select the operating mode The fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and matic and manual ope TVG are automatically adjusted. Auto mode Manual mode Manual mode How to change the range How to change the range Pinch screen.
Instrument Display With connection of appropriate sensors, the instrument display shows various navigation data. How to enable the instrument display Add an instrument display icon to the home to screen to show the instrument display. Drag After setting, tap [ ]. (Incorporation in 3, 4-way screen is also possible.) How to switch instrument displays (ex.
Wireless LAN Settings You can connect to the internet with the wireless LAN signal to download weather information and to connect to an iPhone, iPod, iPad, or Android device. How to connect to an existing LAN Connect to the existing LAN to download weather data or update the software. For smartphone and tablet settings, refer to appropriate manuals.
Page 16
X X X X X X X XXXXXXXX To change the password, tap [Password]. Enter the password, then tap [ ]. Note: A default password is automatically generated. Connect to the Swordfish from the smartphone or tablet. Pub. No. OSE-45120-A (2001, HIMA) TZT12F/16F/19F...