General Information; About This Documentation; Other Applicable Documentation; Structure Of The Safety Notes - SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series Operating Instructions Manual

General information

1

About this documentation

1 General information
1.1 About this documentation
1.2

Other applicable documentation

1.3

Structure of the safety notes

1.3.1 Meaning of signal words
Signal word
DANGER
WARNING
CAUTION
NOTICE
INFORMATION
1.3.2 Structure of section-related safety notes
6
Operating Instructions – MOVIMOT
The documentation at hand is the original.
This documentation is an integral part of the product. The documentation is intended
for all employees who perform work on the product.
Make sure this documentation is accessible and legible. Ensure that persons respon-
sible for the systems and their operation as well as persons who work on the product
independently have read through the documentation carefully and understood it. If you
are unclear about any of the information in this documentation or if you require further
information, contact SEW‑EURODRIVE.
Observe the corresponding documentation for all further components.
The following table shows the grading and meaning of the signal words for safety
notes.
Meaning
Imminent hazard
Possible dangerous situation
Possible dangerous situation
Possible damage to property
Useful information or tip: Simplifies
handling of the product.
Section-related safety notes do not apply to a specific action but to several actions
pertaining to one subject. The hazard symbols used either indicate a general hazard
or a specific hazard.
This is the formal structure of a safety note for a specific section:
SIGNAL WORD
Type and source of hazard.
Possible consequence(s) if disregarded.
• Measure(s) to prevent the hazard.
®
flexible
Consequences if disregarded
Severe or fatal injuries
Severe or fatal injuries
Minor injuries
Damage to the product or its envi-
ronment