Drive Unit Behavior In Case Of A Voltage Failure - SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series Operating Instructions Manual

Operation
7

Drive unit behavior in case of a voltage failure

Advanced functions and displays of manual mode
7.4 Drive unit behavior in case of a voltage failure
180
Operating Instructions – MOVIMOT
The following functions are available in manual mode using MOVISUITE
Release brake
Disable output
stages
[1]
Key [1]
The motor of the drive unit has the following function when the drive is in motion:
In case of a voltage failure, the drive unit uses the motion energy (energy recovery) to
supply the electronics cover with voltage. The inverter in the electronics cover realizes
a controlled motor deceleration.
If the regenerated energy is not sufficient, the inverter activates the holding function.
®
flexible
Actual values Digital inputs and
outputs
[2]
Key [2]
®
:
Acceleration
Reference travel
Timeout
[3]
Key [3] Key [4]
[4]